Unleash the Power of Metal

We offer a range of advanced materials that are thoroughly certified with rigorous quality control measures to ensure outstanding printability and performance.

Choose from our extensive range of material and powders that support a wide range of commercial applications and industrial uses for both metal and polymer printing

Metals

Aluminium

Titanium

Inconel

Stainless Steel (SS316L / SS303 / SS304)

Maraging Steel

Production Nylons

PLA (Polylactic Acid)

ABS (Acrylonitrile / Butadiene / Styrene)

Nylon

Materials for Models/Prototypes

Sandstone

Carbon Fibre

Kevlar

Fibreglass

to find out more about the material and alloys that we can provide

Technical Data

ABS (Acrylonitrile / Butadiene / Styrene)

ABS (Acrylonitrile / Butadiene / Styrene) for Additive Manufacturing

ABS is a thermoplastic material that is ideal for production of strong semi-complex components with a plastic like finish for end product simulation.

Technical Data

Property	Value
Average Resolution	130 -250 microns
Density of 3D printed part	1.05 g/cm³

Thermal Properties

Property	Value
Melting Point	Approx. 200℃
Heat Deflection Temperature	96℃

Mechanical Properties of 3D Printed Material

Property	Value
Tensile Modulus	1627 MPa
Tensile Strength	22 MPa
Elongation at break	6%
Flexural Modulus	1800 – 1900 MPa
Flexural Strengtj	41 MPa
Notched Izod Impact	107

AlSi10Mg Alloy Powder for Additive Manufacturing

AlSi10Mg-0403 alloy comprises Aluminium alloyed with Silicon of mass fraction up to 10%, small quantities of Magnesium and Iron, along with other minor elements.

Generic Data – Wrought Material

Property	Value
Density	2.68 g/cm²
Thermal conductivity	130 W/mK to 190 W/mK
Melting range	570℃ to 590℃
Coefficient of thermal expansion (Hot Rolled solution annealed)	20 μm/mK to 21 μm/mK

Chemical Composition of Powder

Element	Mass (%)
Aluminium	Balance
Silicon	9.00 – 11.00
Magnesium	0.25 to 0.45
Iron	< 0.25
Nitrogen	< 0.20
Oxygen	< 0.20
Titanium	< 0.15
Zinc	< 0.10
Manganese	< 0.10
Nickel	< 0.05
Copper	< 0.05
Lead	< 0.02
Tin	< 0.02

Mechanical Properties of 3D Printed Material

	As Built	HIP treated
Ultimate Tensile Strength (UTS)
Horizontal Direction (XY)	442 MPa ± 6 MPa	334 MPa ± 1 MPa
Vertical direction (Z)	417 MPa ± 27 MPa	339 MPa ± 6 MPa
Yield Strength
Horizontal Direction (XY)	264 MPa ± 2 MPa	211 MPa ± 2 Mpa
Vertical direction (Z)	206 MPa ± 6 MPa	174 MPa ± 4 Mpa
Elongation at Break
Horizontal Direction (XY)	9 % ± 1 %	9 % ± 2 %
Vertical direction (Z)	6 % ± 2 %	4 % ± 1 %
Modulus of Elasticity
Horizontal Direction (XY)	71 GPa ± 5 GPa	71 GPa ± 2 Gpa
Vertical direction (Z)	68 GPa ± 2 GPa	66 GPa ± 3 GPa
Hardness (Vickers)
Horizontal Direction (XY)	119 HV0.5 ± 5 HV0.5	103 HV0.5 ± 5 HV0.5
Vertical direction (Z)	123 HV0.5 ± 2 HV0.5	98 HV0.5 ± 5 HV0.5
Surface Roughness (Post heat treatment)
Horizontal Direction (XY)	5 μm to 9 μm
Vertical direction (Z)	7 μm to 9 μm

In718-0405 Alloy Powder for Additive Manufacturing

In718-0405 alloy comprises nickel mass fraction up to 55% alloyed with iron up to 21% and chromium 21% along with other minor elements. Properties include high strength, excellent corrosion resistance and a working temperature range between -250oC and 650oC (-418oF to 1200oF).

Generic data – wrought material

Property	Value
Density	8.19 g/cm²
Thermal conductivity	6 W/mK to 12 W/mK
Melting range	1260℃ to 1336℃
Coefficient of thermal expansion	12 μm/mK to 16 μm/mK

Chemical composition of powder

Element	Mass (%)
Nickel	50.00 to 55.00
Chromium	17.00 to 21.00
Iron	Balance
Niobium and Tantalum	4.75 to 5.5
Molybdenum	2.80 to 3.30
Titanium	0.65 to 1.15
Cobalt	≤ 1.00
Aluminium	0.20 to 0.80
Manganese	≤ 0.35
Silicon	≤ 0.35
Copper	≤ 0.30
Carbon	0.02 to 0.05
Nitrogen	≤ 0.03
Oxygen	≤ 0.03
Phosphorous	≤ 0.015
Sulphur	≤ 0.015
Calcium	≤ 0.01
Magnesium	≤ 0.01
Selenium	≤ 0.005
Boron	≤ 0.005

Mechanical properties of 3D printed material

	As Built	HIP treated
Ultimate Tensile Strength (UTS)
Horizontal Direction (XY)	1057 MPa ± 11 MPa	1289 MPa ± 4 Mpa
Vertical direction (Z)	943 MPa ± 38 MPa	1228 MPa ± 24 Mpa
Yield Strength
Horizontal Direction (XY)	753 MPa ± 8 MPa	958 MPa ± 8 Mpa
Vertical direction (Z)	639 MPa ± 13 MPa	929 MPa ± 10 Mpa
Elongation at Break
Horizontal Direction (XY)	25 % ± 3 %	23 % ± 2 %
Vertical direction (Z)	19 % ± 8 %	17 % ± 4 %
Modulus of Elasticity
Horizontal Direction (XY)	203 GPa ± 10 GPa	219 GPa ± 6 Gpa
Vertical direction (Z)	191 GPa ± 9 GPa	214 GPa ± 7 Gpa
Hardness (Vickers)
Horizontal Direction (XY)	275 HV0.5 ± 14 HV0.5	408 HV0.5 ± 11 HV0.5
Vertical direction (Z)	295 HV0.5 ± 11 HV0.5	418 HV0.5 ± 16 HV0.5
Surface Roughness (Post heat treatment)
Horizontal Direction (XY)	1.14 μm to 1.70 μm
Vertical direction (Z)	2.36 μm to 3.0 μm

Maraging Steel 1.2709

Maraging Steel for Additive Manufacturing

Material 1.2709 Maraging Steel is a martensite hardening steel that has low warping and very good toughness properties, high extension limit and tensile strength. Uniform contraction at 0.09%. Utilization: Mould and die casting, prototypes, serial parts, springs etc.

Generic Data – Wrought Material

Property	Value
Density	8.1 kg/dm²
Thermal conductivity	14.2 W/mK to 28.6 W/mK
Coefficient of thermal expansion	10.3 μm/mK at 20℃ to 100℃

Chemical Composition of Powder

Element	Mass (%)
Carbon	Max 0.03
Silicon	Max 0.1
Manganese	Max 0.1
Nickel	17 – 19
Molybdenum	4.5 – 5.2
Titanium	Max 0.8
Cobalt	8.5 – 9.5
Aluminium	Max 0.1
Phosphorous	Max 0.01
Sulphur	Max 0.01
Chromium	Max 0.5

Mechanical Properties of 3D Printed Material

Property	Value
Yield Strength (Rp 0.2) after heat treatment at 510℃	2000 N/mm²
Tensile Strength	1100 – 2050 MPa
Elongation directly after generative process / after heat treatment at 510℃	11% / 4%
Rockwell Hardness	35 – 52 HRC
Modulus of Elasticity	120 GPa
Surface roughness	Min Rz 40-60μm (without finishing)

Multijet Fusion PA 12 (Nylon)

Multijet Fusion PA 12 (Nylon) for Additive Manufacturing

Multijet Fusion PA12 (Nylon) is a robust thermoplastic that is capable of producing strong structures with very fine details while optimizing part quality as well as cost. The material is ideal for functional prototyping and final part production. IT can provide high density parts with balanced property profiles. PA12 even offers excellent chemical resistance for its finished surfaces.

Technical Data

Property	Value
Average Resolution	100 – 300 microns
Density of 3D printed part	1.24 g/cm³

Thermal Properties

Property	Value
Heat Deflection Temperature	175℃ (@ 0.45 MPa) 95℃ (@ 1.82 MPa)

Mechanical Properties of 3D Printed Material

Property	Value
Tensile strength	48 MPa (XY), 48 MPa (Z)
Elongation at break	20% (XY), 15% (Z)
Tensile modulus	1700 MPa (XY) , 1800 MPa (Z)

PLA (Polylactic Acid)

PLA (Polylactic Acid) for Additive Manufacturing

PLA is a thermoplastic material that is ideal for production of strong semi-complex components with a plastic like finish for end product simulation.

Technical Data

Propoerty	Value
Average Resolution	100 – 300 microns
Density of 3D printed part	1.24 g/cm³

Thermal Properties

Property	Value
Melting Point	120℃ – 150℃
3D Print Nozzle Temperature	190℃ – 218℃

Mechanical Properties of 3D Printed Material

Property	Value
Tensile strength	103 Mpa
Elongation at break	180%

Reinforced Nylon

Reinforced Nylon for Additive Manufacturing

Nylon reinforced Carbon Fiber, Kevlar, or Fiberglass is a high strength composite 3D printed material that is ideal for prototypes, functional parts, and replacement parts. The high strength to weight ratio rivals most metals and is 24 times stronger than ABS plastic.

Mechanical and Thermal Properties of 3D printed Reinforced Nylon

Also known as stainless steel type 1.4305, Grade 303 stainless steel is the most readily machineable of all the austenitic grades of stainless steel. The machineable nature of grade 303 is due to the presence of Sulphur in the steel composition. Whilst the Sulphur improves machining, it also causes a decrease in the corrosion resistance and a slight lowering of the toughness than 304. Grade 303 is typically used for parts that require heavy machining such as nuts and bolts, screws, gears, aircraft fittings, bushings and shafts.

Property	Nylon reinforced CARBON FIBER	Nylon reinforced KEVLAR	Nylon reinforced FIBERGLASS
Tensile Strength (MPa)	700	610	590
Tensile Modulus (GPa)	50	26	20
Tensile Strain at Break (%)	1.5	5.5	5.5
Flexural Strength (MPa)	470	190	210
Flexural Modulus (GPa)	48	24	21
Flexural Strain at Break (%)	1.2	2.1	1.2
Compressive Strength (MPa)	320	97	140
Compressive Modulus (GPa)	50	26	20
Compressive Strain at Break (%)	0.7	1.5	0.7
Heat Deflection Temperature (℃)	105	105	105

Stainless Steel 316L Alloy Powder

Stainless Steel 316L Alloy Powder for Additive Manufacturing

SS 316L alloy is an authentic stainless steel which comprises iron alloyed with chromium of mass fraction up to 18%, nickel up to 14% and molybdenum up to 3%, along with other minor elements. The alloy is an extra-low carbon variation on the standard 316 alloy.

Generic Data – Wrought Material

Property	Value
Density	7.99 g/cm²
Thermal conductivity	16.22 W/mK
Melting range	1,371℃ to 1,399℃
Coefficient of thermal expansion (Hot Rolled solution annealed)	16 10-6 K-1

Chemical Composition of Powder

Element	Mass (%)
Iron	Balance
Chromium	16.00 to 18.00
Nickel	10.00 to 14.00
Molybdenum	2.00 to 3.00
Manganese	< 2.00
Silicon	< 1.00
Nitrogen	< 0.10
Oxygen	< 0.10
Phosphorous	< 0.045
Carbon	< 0.03
Sulphur	< 0.03

Mechanical Properties of 3D Printed Material

	As Built	HIP treated
Ultimate Tensile Strength (UTS)
Horizontal Direction (XY)	683 MPa ± 3 MPa	614 MPa ± 1 MPa
Vertical direction (Z)	588 MPa ± 3 MPa	577 MPa ± 2 MPa
Yield Strength
Horizontal Direction (XY)	571 MPa ± 6 MPa	236 MPa ± 8 MPa
Vertical direction (Z)	492 MPa ± 12 MPa	236 MPa ± 8 MPa
Elongation at Break
Horizontal Direction (XY)	46 % ± 1 %	58 % ± 2 %
Vertical direction (Z)	54 % ± 5 %	65 % ± 9 %
Modulus of Elasticity
Horizontal Direction (XY)	179 GPa ± 16 GPa	166 GPa ± 19 GPa
Vertical direction (Z)	158 GPa ± 8 GPa	171 GPa ± 23 GPa
Hardness (Vickers)
Horizontal Direction (XY)	224 HV0.5 ± 6 HV0.5
Vertical direction (Z)	244 HV0.5 ± 6 HV0.5
Surface Roughness (Post heat treatment)
Horizontal Direction (XY)	5 μm to 7 μm
Vertical direction (Z)	5 μm to 6 μm

Stainless Steel 303

Stainless Steel 303 for Additive Manufacturing

Generic Data – Wrought Material

Property	Value
Density	8.03 g/cm²
Thermal conductivity	16.3 W/mK
Melting range	1,455℃
Modus of elasticity	193 GPa
Coefficient of thermal expansion	17.3 x 10-6 K^-1

Chemical Composition of Powder

Element	Mass (%)
Carbon	0.15max
Manganese	2
Silicon	1
Phosphorus	0.2
Sulphur	0.15min
Chromium	17-19
Nickel	8-Oct

Mechanical Properties of 3D Printed Material

Tensile Strength	500 MPa
Proof Stress 0.2%	190 MPa
Elongation A5	35%
Hardness Rockwell (HB)	262max

Stainless Steel 304

Stainless Steel 304 for Additive Manufacturing

Grade 304 is the standard “18/8” austenitic stainless; it is the most versatile and most widely used stainless steel, available in the widest range of products, forms and finishes. It has excellent forming and welding characteristics. Grade 304L, the low carbon version of 304, does not require post-weld annealing and so is extensively used in heavy gauge components (about 5mm and over). Grade 304H with its higher carbon content finds application at elevated temperatures. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures. Grade 304 can be severely deep drawn without intermediate annealing, which has made this grade dominant in the manufacture of drawn stainless parts such as sinks, hollow-ware and saucepans. For severe applications it is common to use special “304DDQ” (Deep Drawing Quality) variants.

Generic Data – Wrought Material

Property	Value
Density	8.03 g/cm²
Thermal conductivity	16.3 W/mK
Melting range	1,455℃
Modus of elasticity	193 GPa
Coefficient of thermal expansion	17.3 x 10-6 K^-1

Chemical Composition of Powder

Element	Mass (%)
Carbon	0.07
Manganese	2
Silicon	0.75
Phosphorus	0.045
Sulphur	0.03
Chromium	17.5-19.5
Nickel	8-10.5
Nitrogen	0.1

Mechanical Properties of 3D Printed Material

Tensile Strength	485-515 MPa
Proof Stress 0.2%	170-205 Mpa
Elongation A5	40 % min
Hardness Rockwell B (HR B)	92 max
Hardness Brinell (HB)	201 max

Ti6A14V Alloy Powder

Ti6A14V Alloy Powder for Additive Manufacturing

Ti6A14V alloy comprises Titanium alloyed with Aluminium of mass fraction up to 6.75%, small quantities of Vanadium and Iron, along with other minor elements.

Generic Data – Wrought Material

Property	Value
Density	4.42 g/cm²
Thermal conductivity	6 W/mK to 8 W/mK
Melting range	1,635℃ to 1,665℃

Chemical composition of powder

Element	Mass (%)
Aluminium	6
Vanadium	4
Carbon	0.03
Iron	0.1
Oxygen	0.015
Nitrogen	0.01
Hydrogen	0.003
Titanium	Balance

Mechanical properties of 3D printed material

Property	Value
Yield Strength (Rp 0.2)	950 MPa
Ultimate Tensile Strength (Rm)	1020 MPa
Elongation	14%
Reduction of Area	40%
Fatigue Strength @ 600 Mpa	10,000,000 cycles
Rockwell Hardness	33 HRC
Modulus of Elasticity	120 GPa

ZP151 Composite Powder (Sandstone)

ZP151 Composite Powder (Sandstone) for Additive Manufacturing

ZP151 is a composite material ideal for full coloured products that require rigidity and colour clarity.

Material Composition

Material	% by weight
Plaster	< 70
Vinyl Polymer	< 20
Carbohydrate	< 10

Technical Data

Property	Value
Softening Temperature	60 – 70℃
Melting Point	1450℃
Density	2.6 – 2.7 g/cm³

Mechanical Properties of 3D Printed Material

Property	Value (with Z bond)	Value (with Z-Max 90)
Flexural modulus	7163 MPa	10680 Mpa
Tensile strength	14.2 MPa	26.4 Mpa
Elongation at break	0.23%	0.21%
Modulus of Elasticity	9450 MPa	12560 Mpa
Flextural Strength	31.1 MPa	44.1 MPa